- Store
- >
- Dodge Cummins
- >
- 89-93 Cummins 5.9L
- >
- Gauges/Mounts
- >
- Isspro 4k Tachometer
Isspro 4k Tachometer
SKU:
R8503
$153.97
$153.97
Unavailable
per item
Add the Isspro 4k tach to your first gen that should have came factory on all the trucks.
Note: Dont forget to add the necessary wiring harness to hook it up, there are two different ones. Pre-91.5 picks up the signal from the damper pulley and the 91.5 newer plug into a plug uder the dash.
Note: The wiring kit is optional, if you are handy with some electrical wire. It can be done without the optional harness.
Note: Dont forget to add the necessary wiring harness to hook it up, there are two different ones. Pre-91.5 picks up the signal from the damper pulley and the 91.5 newer plug into a plug uder the dash.
Note: The wiring kit is optional, if you are handy with some electrical wire. It can be done without the optional harness.
Sold Out
Please Note:
Most people like to put this guage in the Steering colum pod, part# ATM15012, This guage will not fit all the way in without modifying the light on the guage itself. What we usally do if this is where the customer wants the tach, we remove the light extension on the guage, "small aluminium piece that the light snaps into." After removal, you will have a hole there, we take a piece of rubber, something less than 1/8'' thick. Cut a small hole just big enough for the light to snap into, once that is fitted. Once that is completed, trace out enough to cover the opening you want to cover, Now super glue it to the back of the guage ensuring the hole for the light is in the center to go in the guage. I know this sounds like you are rigging it, but if you spend a few minutes and make it look nice, it will last forever. We have done numerous sets like this and it does work. Any questions feel free to give us a call.
Most people like to put this guage in the Steering colum pod, part# ATM15012, This guage will not fit all the way in without modifying the light on the guage itself. What we usally do if this is where the customer wants the tach, we remove the light extension on the guage, "small aluminium piece that the light snaps into." After removal, you will have a hole there, we take a piece of rubber, something less than 1/8'' thick. Cut a small hole just big enough for the light to snap into, once that is fitted. Once that is completed, trace out enough to cover the opening you want to cover, Now super glue it to the back of the guage ensuring the hole for the light is in the center to go in the guage. I know this sounds like you are rigging it, but if you spend a few minutes and make it look nice, it will last forever. We have done numerous sets like this and it does work. Any questions feel free to give us a call.